DT168
ENGLISH
2
3
ENGLISH
THE DT168
Powering ON and OFF
The Power Bu
tt
on is located in the front of the DT168. The Power Bu
tt
on may be con
fi
gured to
func
ti
on di
ff
erently depending on the power op
ti
ons of the opera
ti
ng system. In general, to turn the
DT168 on, push and release the Power Bu
tt
on on the front bezel. The adjacent power LED will be lit
(blue) and the corresponding interface will be displayed on the display monitor.
To turn o
ff
the device, again depending on so
ft
ware opera
ti
ng system, push and release the Power
Bu
tt
on or use a so
ft
ware shutdown interface. In the event of system lockup, the Power Bu
tt
on may
be used to perform a reset on the device. To do that, push and hold the Power Bu
tt
on for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Bu
tt
on
again will restart the device.
Device Ports
The DT168 features a comprehensive set of I/O ports while preserving the compact size of the
enclosure. The VGA, Network (10/100 BaseT Ethernet), and Power ports are supplemented by a set
of two (2) Serial, one (1) Parallel, four (4) USB 2.0 and Audio ports.
Memory and Storage
The DT168 may be available in memory con
fi
gura
ti
ons ranging from 64MB of
fl
ash memory to 4GB
of
fl
ash. Depending on base so
ft
ware con
fi
gura
ti
on, the user may use up the internal
fl
ash memory
of the WebDT 168 for the user’s installed so
ft
ware and storage. The user may also supplement
storage space with USB-based peripherals such as
fl
ash disks, disk drives, etc. RAM capacity ranges
from 128MB to 1GB.
VESA Moun
ti
ng Bracket Installa
ti
on Guide for DT168
It is quite simple to mount the DT168 to VESA adapters or LCD monitors using the external
moun
ti
ng bracket.
OPTIONS
The DT168 is designed to work with a range of custom and o
ff
-the-shelf op
ti
ons to enhance its
applicability for various deployments.
USB-to-Serial and USB-to-PS/2 adapters
•
Bracket and Cable for Internal Hard Disk Drive (HDD) Moun
ti
ng
•
IInternal (mini-PCI) and External (USB) wireless LAN (WLAN) adapters
•
Short VGA cable for connec
ti
on to mounted display
•
External bracket for moun
ti
ng the DT168 to VESA adapters and LCD monitors (see moun
ti
ng
•
process above)
Precau
ti
ons
Always exercise care when opera
ti
ng and handling the DT168.
•
Never disassemble any por
ti
on of the enclosure. It will void any product warranty on the DT168.
•
Do not use any AC/DC adapter other than the one provided with the device or acquired from the
•
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power
•
down the DT168 and disconnect all power sources. Please report the problem to your device
provider immediately.
Rear View
Front View
A B C
D
F
E
G
G
H
I
A
E
H
B
D
F
I
C
G
USB ports
Power Indicator
Power bu
tt
on
Audio jacks
Parallel Port
Serial Ports
VGA
Ethernet port
USB ports
