BASIC OPERATION GUIDE
Ba�ery Charger Kit
Instruc�ons:
The charger is designed to charge one ba�ery pack. To connect the ba�ery pack to
the charger:
•
Place the charger pack with LED-light facing up.
•
Place the ba�ery with top facing up (top is the side that is viewable when on
the tablet).
•
Align the ba�ery pin connector facing the charger opening. Please see images.
Slowly insert the ba�ery pack into the charger,
making sure the ba�ery pin connector lines
up with the charger pins. Push the ba�ery
pack all the way into the charger, the LED light
on the charger should come on.
Thank you for purchasing theBa�ery Charger Kit by DT Research. This device
enables charging of one DT Mobile Tablet (DT301/ DT311/ DT313/ DT372/ DT340
series) ba�ery pack. Please follow this guide for opera�onal instruc�ons.
CAUTION:
This charger must only be used with the specific ba�ery models for which it is
designed. Failure to do so may result in ba�ery or charger damage, or personal injury.
ACC-001-311 for charging the 45W ba�ery pack
ACC-001-34 for charging the 60W or 90W ba�ery pack
