Power/Battery LED Status
• Blue indicates the battery is 25% to 100% charged
• Blinking blue indicates the battery is charging
• Orange indicates that the battery is between 11% to 25%
• Blinking Orange indicates that the battery is below 10%
2
3
PRECAUTIONS
• Always exercise care when operating and handling the Medical-Cart Computer.
• Never disassemble any portion of the enclosure, as this will void any product warranty on
the Medical-Cart Computer.
• Do not use any AC/DC adapter other than the one provided with the device or a replacement
acquired from the manufacturer.
• In the unlikely event that smoke, abnormal noise or strange odor is present, immediately
power down the Medical-Cart Computer and disconnect all power sources. Please report the
problem to your device provider immediately.
BASIC FEATURES
The Medical-Cart Computer integrates a bright 19.5”, 22” or 24” display with a high performance
system, USB ports, and integrated options such as capacitive touch, hot-swappable batteries, and
smart card reader for a comprehensive point-of-healthcare solution.
Powering ON and OFF
If your Medical-Cart Computer comes with the battery packs, please open the battery slot caps
and then put in the battery packs one by one. If not, please use the AC-DC adapter with the
Medical-Cart Computer for the power supply. To activate the Medical-Cart Computer, push and
quickly release the Power Button and the display will come on in a few seconds. To put in Standby
mode, push and quickly release the Power Button. To turn off for extended storage, power off the
device safely using any software function that “shuts down computer” provided in the software
operating system.
Wireless Networking
Wireless LAN
The Medical-Cart Computer is often delivered with an embedded (user-inaccessible) 802.11ax
WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the Medical-Grade Integrated LCD System
should be able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Medical-Grade Integrated
LCD System and the access points have to match. The SSID is case-sensitive and it is
recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator
or your networking equipment literature to properly configure associated settings such as
Authentication mode, etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
NOTE:
The battery packs (optional) shipped with your device may be low in power—please use the
AC-DC adapter with the Medical-Cart Computer when setting up the device for the first time
to fully charge the battery packs. You may charge the battery packs with them attached to
the Medical-Cart Computer, or with the optional battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly.
If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark,
the battery pack(s) may have been drained substantially. Try unplugging/ replugging the
AC-DC adapter to the Medical-Cart Computer a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in
“Standby” mode while not in use. Pushing briefly on the same button will wake up the
system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the device—this form
of hardware shutdown is intended to be a means of recovery from device lockups, and not as
normal operation.
Ba�ery Indicator
Ba�ery Indicator
NOTE:
If connecting an external monitor to the Medical-Cart Computer (via HDMI port), you must
power the Medical-Cart Computer with the provided AC-DC power adapter.
581T:
582T/584T:
