4
5
OPERATION
Powering ON and OFF
To activate the 301SY, push and quickly release the Power Button. The display will
come on in a few seconds. To put the 301SY in Standby mode, push and quickly
release the Power Button. To turn the 301SY off for extended storage, power off safely
using any software function that “shuts down computer” provided in the software
operating system.
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring
the Mobile Tablet
The 301SY may be configured using the utilities and methods dictated by the
software operating system. The 301SY should be configurable for various properties
such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The 301SY is often delivered with an embedded (user-inaccessible) 802.11ac WLAN
adapter equipped with a hidden custom antenna.
•
Through the support of typical WLAN adapters, the 301SY should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 301SY and the
access points have to match. The SSID is case-sensitive and it is recom- mended
that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
•
Refer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
The Bluetooth configuration application is enabled from the Windows System Tray
or from the Android Settings APP. Follow the instructions and options provided
within the application to configure and invoke Bluetooth connectivity with the
corresponding peripherals.
NOTE:
For DT301Y, avoid using the Power Button (“hold 4+ seconds” feature) to turn
off the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operation.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the battery pack(s) may have been drained substantially.
Try unplugging/ replugging the AC-DC adapter to the 301SY a few times to
activate the charging process.
NOTE:
The battery pack shipped with your tablet may be low in power—please use the
AC-DC adapter with the 301SY when setting up for the first time to fully charge
the battery pack, or use the optional battery charger kit.
