Press the lock button on the base, and turn the base
counterclockwise to make it separated from the product’s body.
Place the base on the selected installation position, and use
pencil make hole mark along installation hole on the base.
Use electric drill with 6.5mm drill bit to drill two installation
holes(
6.5,depth 35mm) on the mark.
Strike plastic dilatant into installation holes, fix the base on
installation hole with 3x30 screw with gasket and tighten the
screws.
Fix in 9v cascading battery, before fixing it push the red
thimble into battery box; if you don’t do that, you cannot fix the
alarm body on the base.
Make the gap on the alarm aim at the lock button on the base,
press in the lock button and turn clockwise, when buttoned in
completely, you will hear sound.
When you need to unfix it to replace battery, you only press
the button and at the same time turn counterclockwise.
INSTALLATION
TESE
test once a week at least. Press the button continually, the
alarm will give the interval alarm sound like “Bi-Bi-Bi-”.,which
shows the alarm is normal.
if it doesn’t work like above condition when you repeat to test
it, take down it and don’t dismantle it by yourself, you should
take it back to the franchiser to deal.
don’t test it with fire.
The indicator flashes one time every 30sec;when alarming, it
flashes one time every second.
after its operation is normal, when the battery reach the using
time limit, it will give low sound (a quick “Bi” sound) to tell you
replace the battery.
Little smoke won’t cause alarm; the indicator lamp probably
will quicken to flash, but the product won’t alarm, so it can
prevent false alarm. Only when continual smoke reach the
alarm value, about 10~15 seconds later after smoke enter the
alarm slowly, it will alarm. Don’t forget to ventilate the kitchen
when cooking.
When it is inducted by cigarette smoke passing by
accidentally, the smoke alarm will stop alarming after smoke
leave. Please set your heart at rest, if you want to stop the
buzzer sound, you can blow air into the smoke alarm to make
the smoke in alarm out with air current and stop alarming.
Test it once a week at least.
Clean it once a month at least, use the vacuum cleaner to
aspirate dust.
Don’t clean it with water or cleanser that will destroy the
smoke alarm.
Replace battery: if the smoke alarm regularly give a sound at
several minutes intervals, that indicate the battery energy is
shortage and should replace it. Fix the battery according to the
mark on the battery box, the battery type can be as follow:
Carbon and zinc type:
EVERY DAY 216 OR 2122; GOLDPEAK
1604P OR 1604S
Alkaline battery:
EVERY DAY 522 DURACELL MN1604 Mx1604;
GOLDPEAK 1604A
Lithium battery:
ULTRALIFE U9VL
When regularly checking, you should save energy as possible
as you can, because the alarm energy consumption is very
much,
1) You can not install the smoke alarm when the battery is not
fixed in, don’t install it forcedly, otherwise the red thimble will be
destroyed.
2) Choose durable battery as possible as you can that will make
battery’s using time longer.
3) Notice whether the indicator lamp flash once 30sec normally
or not. There is two probability that the indicator lamp don’t flash.
One is that the battery’s energy is shortage, the other is that the
battery is not fixed fitly. The simple way is to replace the battery
or refix the battery.
After installation you must notice whether the key indicator
flash once 30sec or not, and press the key for several seconds
to see whether the buzzer can give sound or not , if do, that
shows normal. Above is required to do, otherwise the smoke
alarm you installed probably don’t work.
It can only tell us that fire will occur so that you can deal with
the fire in time and have more time avoiding great loss.
It is not safe absolutely, because it can not alarm absolutely,
when smoke appear, if there is obstruction to obstruct smoke or
smoke is taken off by air current, smoke can not reach the
smoke alarm.
It is not fire extinguisher and also can not induct fire, you
should have the fire-fighting devices to help.
Dial telephone to the fire control office.
Don’t feel panic, keep calm. Go through the routeway planned
in advanced and leave as quickly as possible, don’t waste much
time to take things.
Feel whether the door is hot or not. If hot, don’t open the door;
if not, you also should prevent the flame in and you can choose
other routeway to flee.
With wet towel cover your mouth and nose, don’t inbreathe
smoke.
After fleeing out, gather in the indicated place and ensure
person is not injured or dead.
REGULAR MAINTENANCE
SPECIAL ATTENTION:
LIMITATION:
WHAT TO DO WHEN FIRE OCCUR.
