HD PVR Viewer’s Guide – V1.02
Page 6 of 30
3.2
TV,
A
LT
,
TV
G
UIDE
,
L
ANGUAGE AND
M
UTE BUTTONS
The five buttons at the top of the remote control each have a secondary function (sometimes also referred
to as the “shifted” mode).
If you have not first pressed SHIFT, these buttons do the following :
•
TV
: always take you to Live TV. If you are watching in the buffer, pressing TV takes you to Live
TV on the current channel. If you are watching in playback, pressing TV stops playback and takes
you to Live TV on the current channel.
•
ALT
: goes to the last viewed channel.
•
TV GUIDE
: goes to the TV Guide.
•
LANGUAGE
: Displays the Language / Soundtrack pop-up.
•
MUTE
: switches the audio on or off (depends on the current audio status).
To activate the secondary functionality, press
SHIFT
followed by the required button. After pressing SHIFT,
the SHIFT button will flash, confirming the mode of the remote control. It is not necessary to hold both
buttons down at the same time.
•
SHIFT TV :
goes to the Audio Bouquet.
•
SHIFT ALT :
displays the Subtitles / Teletext pop-up (Note : Subtitles / Teletext are not currently
available on the HD PVR).
•
SHIFT TV GUIDE :
currently disabled.
•
SHIFT LANGUAGE :
goes to the Parental Control Menu (Note : you need the valid PG PIN code to
enter the Parental Control Menu).
•
SHIFT MUTE :
currently disabled.
3.3
T
HE
D
IAL
The dial should be set to TV1 for use with the HD PVR.
The “window” in the dial (where you see TV1) lights up when any button is pressed, confirming that the
remote control is active and that the command has been sent to the decoder.