*
*
Network PA System
Network Column Speaker
3
4. Setup Instruction of POE6368 on the host
This speaker can be customized to modify the network parameters. Please read this section in detail if you want to
use this feature
Method 1:
1. Modify IP address of the computer. IP of the computer and column speaker should be on the same network
segment. For example, if the column speaker’s IP address is 192.168.40.5, then the IP of the computer should be
set to be 192.168.40.252. (Note: IP conflict is not allowed in the setting process);
2. After the connection of host and the column speaker, set IP address based on the label of the column speaker
in the host IE browser, and you can enter the following information;
3. In the "Network Configuration" column, modify the IP address or server address and click "confirm" to save
the changes.
Method 2:
1. Enter the host software "Settings" -> "System Maintenance" -> "Device Maintenance"
2. Find the IP address on the column speaker’s label. Select and click to modify.
3. Modify the parameters and click OK to save changes.
