*
*
Voice Evacuation System
10
5. Installation instructions
5.1 Installation size
后视图
左视图
右视图
仰视图
俯视图
180
350
240
75
400
Back view
Left view
Right view
Top view
Bottom view
180
350
12
4.
5
240
75
400
42
8
50
0
42
8
50
0
5.2 Steps to install
1) Open the package of this device and check whether the device and accessories are complete by referring to
the "packing list" at the end of the manual;
2) First remove the top fender of the casing, then connect the cables through the top of the casing (such as
network cable, audio cable, etc.), and then fix the top fender of the casing;
3) Then fix one end of the two triangle accessories on the bottom of the casing with screws;
4) According to the hole size on the back panel of the casing as to the above picture, nail 2 pcs M6 self-tapping
screws on wall or other solid surfaces;
5) After confirmation, align the two holes with screws and hang the device on wall or other solid surfaces;
6) Finally, fix the other end of the two triangle accessories on wall or other solid surfaces with screws.
Note: please ensure that this device and other devices connected to this system are not in power during the
installation process!
Installation size
Cable outlet
Cover 1
Cover 2
The holes on the back of
the case should be aligned
with the wall screws
Triangle
accessory
back baffle