5
OPERATION
1.
Digital Keys
As shown on right, the digital keys on the front
panel have two functions:
①
Input of storage number when you store and
recall the radio channel manually.
②
Direct input of radio frequency value when
you want to select the radio station.
How to operate the digital keys:
1)
Input the storage number: To store the radio station manually, please firstly press the
storage key “
MEMO
”. When “CH_ _” appears on the display, press the digital key to
input the storage number and press “
MEMO
” again. Each band of the unit is available
with 40 storage numbers.
a)
To input the storage number 1-4, firstly press “
+10
” key (to input the number 0)
and then press “
M4
” key (to input the number 4);
b)
To input the storage number 5-39, you may directly press the corresponding digital
keys. For example, you may directly press “
M5
” to input the storage number 5;
press “
M2, M9
” to input the storage number 29; press “
M3, M9
” to input the
storage number 39.
c)
When inputting the storage number 40, you may directly press “
M4
” key.
2)
Input the radio frequency value: The radio frequency range of FM band is 87.00MHz -
108.00MHz, and the radio frequency range of AM band is 522kHz-1620kHz. To select a
radio station, you may directly input the radio frequency value. To do this, firstly hold
down “
AUTO
” key until the symbol “_ _ _ _ _” appears on the screen. Then, release
the key and directly press the digital key to input the radio frequency value. After that,
the unit will play the radio station you input.
a)
To input the frequency value of FM band below 100MHz, you may directly press
the corresponding digital key. For example, if the frequency value to input is
91.40MHz, you may directly press “
M9
、
M1
、
M4
、
+10
”. To input the value over
100MHz, firstly press “
M1
”, so that “10” will appear on the screen. Then, press the
corresponding digital key. For example, if the frequency value to input is
106.60MHz, you may directly press “
M1
、
M6
、
M6
、
+10
”.
Notes: For FM band, the frequency step between two radio frequencies is 50kHz;
therefore, the last digit of each radio frequency value is 0 or 5. If the last digit of
frequency value you input is the number 1 – 4, the main unit will automatically
correct it to 0. If the last digit you input is 6 – 9, the main unit will automatically
correct it to 5.
M1-M9 for
input of the
number 1 – 9
+10 for
input of the
number 0.
