* *
网络化广播系统
网络广播功放
MAG68
系列
网络广播功放
MAG68
系列
5
this machine, it is possible to publish the voice
broadcasting directly to this window.
7
Microphone mute adjustment
MIC1 mute depth adjustment button.
8 EMC break-in playing output
The signal output from this interface is under
the control of the host.
9 Auxiliary output interface (AUX OUT)
It is used to connect the other power amplifiers
in order to expand the power.
10 MIC2 interface
This interface is used to connect the
microphone in order to achieve the local paging or
field speaking.
11. 100V output common port
100V constant voltage output cold end.
12 100V output port
100V constant voltage output hot end.
13 Power input socket and fuse holder
It is used to provide this machine with the
working power supply. If the fuse is blown, please
replace with the fuse in the same specification; if
the fuse is blown continuously, it indicates the short
circuit in the machine; please replace the fuse after
the troubleshooting.
14 Fan port
2.3 Description of structure of remote controller
The structure of the remote controller is shown in the figure on the right side:
1. Button of mute.
2. Numeric keys:
Used for setting of IP address and setting of parameter value.
3
.
F5:
When inserting U-disk, press F5 button to play/stop.
4. Button of selecting last song
:
CH+ is used to select the previous program of the music played currently.
5. Volume decrease:
V- is used to decrease the output volume of the terminal.
6. F7: Button of play/pause:
Repeat to press this button to switch over between playing on demand and pause.
7. Enter key:
In the idle state, press the Enter key to adjust the output of bass
(Cycling from 0 to 15).
8. Button of selecting next song
:
CH- is used to select the next program of the music played currently.
9
.
Cancel key:
In the idle state, press the Cancel key to adjust the output of treble (cycling from 0 to 15);
In the other states, press the Cancel key to cancel.
10. Volume increase:
Figure (3)
1
8
13
2
2
3
4
5
6
7
12
2
11
2
10
2
9
2
