*Network Public Address System
17
After the group setup is completed, touch the "Return" button to exit the setup interface.
4.3.2 Network Setup
On the "System Setup" interface, touch the "Network Setup" icon to enter the network setup interface of the
current paging station. On this interface, the user can set up the IP address, subnet masks, gateway and server IP
address for the current paging station.
The user can touch the desired parameter and move the cursor to the parameter and then press the "DEL"
button on the keyboard to delete the existing digits and input the desired digits; or otherwise, the user may
touch and move the finger across the parameters to be modified and then press the "DEL" button on the
keyboard to delete the existing digits and enter the new digits.
After the setup is completed, the user should touch the "OK" button to confirm and exit the setup interface.
4.3.3 Time Setup
On the "System Setup" interface, touch the "Time Setup" icon to enter the system time setup interface. On this
interface, the user can set up the current system time and data.
To set up time and date, the user can touch the gray arrows in digit box to adjust the digit.
After the setup is completed, press the "OK" button to confirm and exit the setup interface, if the user
exits the setup interface without touching the "OK" button but by touching the "Return" button, then the
setup operation will not modify the previous time and date settings.
4.3.4 Backlight on time
On the "System Setup" interface, touch the "Backlight On Time" icon to enter the backlight on time setup interface
of the current paging station.
The user can touch the backlight on time value or the small circle before the Always on option, the small
circle will be ticked and marked by highlighted "√", indicating that the option has been selected. If no
operation is made for the selected backlight on time, the backlight of the screen will automatically turns
off, which helps to save energy and to extend the service life of the screen.
After the setup operation is completed, press the "OK" button to confirm and exit the setup interface, or
otherwise, the user can touch the "Return" button to cancel the setup operation and exit the setup interface.
4.3.5 Microphone Setup
On the "System Setup" interface, touch the "Microphone Setup" button to enter the interface to set up the automatic
off time of microphone.
The user can touch the time value or the small circle before the Always on option, the small circle will be
ticked and marked by highlighted "√", indicating that the option has been selected. If no signal in input
to the microphone for the selected time period, then the microphone of the current paging station and the
zone called will be automatically turned off.
After the setup operation is completed, press the "OK" button to confirm and exit the setup interface, or
otherwise, the user can touch the "Return" button to cancel the setup operation and exit the setup interface.
