Amplifier Output, Antenna
Power Line
Low Voltage Signal Lines
Cassette in-wall installation
Cassette size:
（
L
×W×H）172×86×55mm
○
1
Install cassette and wiring
○
2
Turn off power supply
（
Push the switch to right
）
Close
○
3
Connect to wiring terminal
○
4
Use screws to fix bottom box to Cassette
Screw up on both
sides
Note: Push the switch
to the right (turn off)
○
6
Half install panel and test
○
5
Install the button battery in panel
Install battery here
Half install panel to the bottom box→ Turn on power
（
Push the switch to left
）
→Functional test
Half install:
2mm space
between
panel
and
bottom box
2. Dismounting
○
1
Turn off the power
○
2
Open the fix buttons
→
Pull out the panel horizontally
Button × 6
Button Position
Open the middle button with thumb or other objects
(not sharp) slide from upper left corner gap to right,
open the rest buttons by slide along the gap. You will
hear a sound like ‘Click’ when each button is opened.
1. Pull out the panel horizontally after open all the buttons.
Thumb slide along the gap in
circle
Install Button Battery
Button Battery
○
7
Fastening the panel after test is ok and
Installation is complete
Panel and bottom
box fix completely
