DSPPA D6201, User Manual

Page: 6 / 28

* *
Conference Host
1
1. Product Instruction
1.1 Equipment Introduction
The D6201 is a digital conference system host that integrates advanced camera management and control
functions such as automatic camera tracking, 4.3-inch True Color touch screen control, and intuitive graphical
interface display. The digital conference system host is the core device of the entire conference system. It
supplies power to the connected conference microphone units. It can realize conference control, unit setting,
electronic voting, camera tracking, audio input and output functions, and can seamlessly dock with the control
system. It
’
s suitable for all kinds of large and small meeting events.
1.2 Features

Conform to IEC 60914 international standard

The conference host can connect to 128 conference Mic, can extend to 4096 conference Mic via extender
8-pin conference cable connection, support cascaded connection

FIFO, NORMAL, VOICE, FREE, APPL five conference modes

Support simultaneous speakers limit setting of 1/2/3/4/5/6

Support management of Voting and Speech Limit etc.

4.3” TFT touch screen, friendly graphical interface, easy to use

Support Chinese/English system languages, other languages can be customized

Support VIP Mic setting (up to 30), VIP Mic can speak freely in all the 5 conference modes

Built-in DSP sound processor, support low-cut, frequency-shift and equalizer control

Support conference recording, manually or automatically

With Mic detection function, manually or automatically

Support speech timing function, can set up speech time limit and reminder

Support video tracking, with 6 HDMI in and 1 HDMI out, 6 BNC in and 1 BNC out

With RS232 interface to link with central control system, with RS422 interface to control 6 cameras

8-pin female interfaces: 1 for Interpretation Host, 1 for extender, 3 for conference Mic

RCA interfaces: 2 AUX input, 2 AUX output, 2 Alarm input with override function

XLR interfaces: 2 AUX output to amplification system

+5V Alarm trigger interface: interact with the 2 Alarm RCA input

RJ45 interface: based on TCP/IP protocol, support computer remote control

Support Android pad remote control

The shell is made of all-metal materials. The connection between the circuit and the shell is enhanced with
the ground wire. It has a contact type 4kV and an air-type 8kV antistatic capability.

High-end design, 2U standard chassis, can be installed in a 19” standard cabinet.