Uninstalling the System
▲
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1104 Hardware Installation and Configuration March 2004
I
■■■■■■■■■■■■■
▼
76
■■■■■■■■■■■■■■■
▼
How to Remove the Hardware
Preconditions
■
The host PC is switched off.
■
Precautions are taken to avoid damage by high electrostatic
voltages. For details, refer to
Safety Precautions for Installing and
Connecting the Hardware
on page 18.
Method
To remove the dSPACE board from the host PC
C
WARNING! Hazardous voltages.
Risk of electric shock and/or damage to the hardware.
Before removing any board, make sure that:
■
The power supply of the host PC is switched off.
■
No external device is connected to the dSPACE system.
1
Disconnect the host PC and all external devices connected to them
from the power supply.
2
Unplug any external devices or connector panels from the I/O
connector of the DS1104.
3
Open the enclosure of the host PC.
4
Unscrew the bracket of the DS1104.
5
Remove the DS1104 from the slot.
6
Reinstall the original bracket to cover the opening at the rear side
of the enclosure.
7
Close the enclosure, reconnect the PC to the power supply, and
turn it on.
The host PC should boot as usual.
Summary of Contents for CLP1104
Page 6: ...Contents DS1104 Hardware Installation and Configuration March 2004 I 6 ...
Page 20: ...Safety Precautions DS1104 Hardware Installation and Configuration March 2004 I 20 ...
Page 118: ...Mapping of I O Signals DS1104 Hardware Installation and Configuration March 2004 I 118 ...
Page 162: ...Data Sheets DS1104 Hardware Installation and Configuration March 2004 I 162 ...
