Dana
User Manual
Page 17 of 28
Copyrights DSP4YOU ltd
With the talker and listener selected, the next step in building a stream is to select the source channels from the talker
channel section. You can select one or multiple audio channels (press the CTRL key) from the Talker list. Simply
‘drag&drop’ them to the Listener channel list as shown below:
Although the user interface will automatically pack up the talker channel in consecutive order on the listener side,
audio channels can be re-arranged. Using the Up & Down buttons, one can re-organize the order of channels on the
listener side as shown below.
Once a stream is configured, simply click the “Build Stream” button at the center of the dialog box. If successful, a
dialog box will acknowledge the stream configuration with the stream ID.
