BIOS Setup Information
96M4011o User’s Manual
4-7
Virus Warning
Allows you to choose the VIRUS warning feature for IDE Hard Disk boot sector
protection. If this function is enabled and someone attempt to write data into this
area, BIOS will show a warning message on screen and alarm beep.
Enabled
Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access the
boot sector or hard disk partition table.
Disabled
No warning message will appear when anything attempts to access
the boot sector or hard disk partition table.
CPU L1 Cache/L2 Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design.
Enabled Enable
cache
Disabled Disable
cache
Quick Power On Self Test
Allows the system to skip certain tests while booting. This will decrease the time
needed to boot the system.
Enabled
Enable quick POST
Disabled Normal
POST
First/Second/Third/Other Boot Device
Select your boot device priority.
The choice: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2 HDD3, ZIP/100,
USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN and Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical driver B to
logical drive A and Vice-Versa.
The choice: Enabled, Disabled.
Boot Up Floppy Seek
Enabled tests floppy drives to determine whether they have 40 or 80 tracks
The choice: Enabled, Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: Off, On.
