Installation Instructions (continued)
17.) Mount the two control heads to the mainframe using the provided 3/8-16
carriage bolts. Unless equipped with key overrides, it does not matter if the
springs are pointed to the left or the right. Be aware that the control heads
18.) If required, refer to the wiring diagram & legend for connecting access control
to the turnstile.
19.) Refer to the hydraulic shock information to properly adjust the rotor’s rotation.
Ideally, the rotor should rotate to the home position, but do so without slamming.
This prevents wear and tear on the control head assembly.
Mobilgrease XHP 222 Special with Lithium Thickener, but a simple white lithium or
similar grease is suitable.
21.) Test the turnstile to ensure it is functioning properly, reinstall the cover on the
Tuck smaller half of cover under
larger half and over the main
channel, fasten into place.
Place larger half of cover onto
the main channel and fasten
it into place.
Main Channel
Larger Main Cover
Notched Cover Panel
512-321-4426
INS-DS400T-190401
Designed Security, Inc - 1402 Hawthorne Street, Bastrop Texas 78602 - (800) 272-3555
17
