Assembly
H
G
F
H
F
E
D
G
4
□
Pull the excess power cord (H) through the base (G).
□
Tighten the lower tube (F) onto the base (G).
□
Pull the excess power cord (H) through the base (G).
□
Tighten the middle tube (E) onto the lower tube (F).
□
Tighten the upper tube (D) onto the middle tube (E).
1
Connecting the lower tube to the
base
2
Connecting the remaining tubes
NOTE:
Do not twist the power cord (H).
NOTE:
Do not twist the power cord (H). Be careful to
match the thread between the connector and pole. Do
not tighten them when the thread is not matched.
