6
Step 4 – Driver installation
The following procedures are to be followed to be able to use the ADSL services as provided
by Telecom NZ. These procedures are to be followed to install the drivers for Windows 98 SE
and Windows XP. Installation for the other Windows operating systems will be similar.
Windows 98 Driver Installation
1.
When the modem is connected to your computer, the Add New Hardware Wizard
dialog box appears. Click Next.
2.
In the new dialog box, select Search for the best driver for your device
(Recommended) and click Next.
3.
In the new dialog box, select Specify a location, and click Browse to navigate to the
E:\drivers\Wan folder on your CD-ROM (where E is the letter of your CD-ROM drive).
Then click Next.
4.
Windows is ready to install the driver for the modem (XH1148 – DSE ADSL Modem
USB Interface). Click Next.
5.
Windows has finished installing the driver. Click Finish.
6.
Windows may ask to insert the Windows 98 CD. If it is the case, remove the Modem
installation CD and insert the Windows 98 CD.
7.
Restart your PC. After the PC has restarted, the shortcuts named DSE ADSL
Connection and DSE ADSL Control Panel will be on the desktop.
8.
The USB ADSL driver has been successfully installed and the Status Task Bar icon
will appear in the System Tray.
9.
To verify that the ADSL modem has been installed properly, right click the My
Computer icon on the desktop and select Properties. Select Device Manager tab.
The XH1148 DSE USB ADSL WAN Adapter should be under the Network
Adapters, and the XH1148 – DSE ADSL Modem USB Interface should be under the
Universal Bus Controllers.
After your computer restarts, proceed to the “Network Settings” section and follow the
instructions for your operating system.
