DSE RY Series, Installation Manual, Page: 3 / 57

INSTALLATION MANUAL
RY SERIES - IP CAMERAS ANPR
Page:3
DSE SRL - ITALY - WWW.DSE.EU
Installation
CONNECTIONS
All RY series cameras they have 2 connectors: a mains socket and a 12VDC power plug
12VDC NETWORK

RJ45 NETWORK PORT - RJ45 FEMALE connector to connect the LAN network. This connector
connects to the network, for example to a port on a switch or router, using a straight-through
network cable. The camera supports POE power so if your switch supplies POE power, the
camera will receive power along the network cable and requires no other connections.

12VDC - Plug to connect a 220VAC / 12VDC power supply (not included). This plug is used if
you connect the camera to a network switch that does not supply POE power. If, on the other
hand, the camera receives POE power from the network cable, this connector will be unused.
INTERNAL BOARD
1 - MicroSD card slot for local recording
2 - Reset button
3 - LCD monitor
4 - Push-button panel
5 - Alarm relay output OUT
MOUNTING THE CAMERA