MANUAL CONFIGURATION
RK SERIES - IP CAMERAS H264
Page:
17
Page:
17
DSE SRL - ITALY - WWW.DSE.EU
we're used to seeing.
In a color camera devoid of day / night function, the IR cut filter presence makes it impossible to use the infrared lighting.
In order to allow the passage of infrared light in the night mode, the cameras of this series integrate a mechanical device capable of
physically removing the IR cut filter at nightfall. This is called ICR (
Infrared Cut-Filter Removable)
and ensures the camera performance
physically removing the IR cut filter at nightfall. This is called ICR (
Infrared Cut-Filter Removable)
and ensures the camera performance
physically removing the IR cut filter at nightfall. This is called ICR (
Infrared Cut-Filter Removable)
and ensures the camera performance
day / night.
The camera automatically switches day / night depending on the ambient light. In the night mode, the recovery takes place in B / N and
turn on the IR illuminators. With this parameter adjusts the reaction speed of the camera when removing the filter in response to a
variation in brightness. It is a necessary delay to avoid accidental switching.
NOISE REDUCTION 3D
- Function for Digital Video noise reduction if any.
NOISE REDUCTION 3D
- Function for Digital Video noise reduction if any.
WHITE BALANCE -
In this window it is defined as the white balance in order to make the realistic white color in all lighting situations. The
WHITE BALANCE -
In this window it is defined as the white balance in order to make the realistic white color in all lighting situations. The
WHITE BALANCE -
In this window it is defined as the white balance in order to make the realistic white color in all lighting situations. The
AUTO mode is recommended for most applications.
In case of particular and can set the MANUAL mode lighting that offers the possibility to establish the white tone manually with the sliders
below RED / GREEN / BLUE
RULES 'OF EXPOSURE -
In this window, you define the behavior of the electronic shutter (diaphragm). The AUTO mode is
RULES 'OF EXPOSURE -
In this window, you define the behavior of the electronic shutter (diaphragm). The AUTO mode is
RULES 'OF EXPOSURE -
In this window, you define the behavior of the electronic shutter (diaphragm). The AUTO mode is
recommended for most applications.
In special cases it is possible to set the MANUAL mode that offers the possibility of setting the aperture time manually SHUTTER in the
box below. It should be noted that with manual setting, the camera will not be able to adapt to changes in brightness. You can set times
from 1 second to 1/10000 sec.
In manual setting it is also activates the GAIN CONTROL (AGC) which increases the yield of low brightness of the camera, however, by
introducing an inevitable video noise.
BACKLIGHT COMPENSATION -
This function is used to improve the visibility of a dark subject against a bright background such as a
BACKLIGHT COMPENSATION -
This function is used to improve the visibility of a dark subject against a bright background such as a
customer walks into a store taken in front.
ANTI FLICKER
- Improves shooting a TV screen by avoiding striped effect.
ANTI FLICKER
- Improves shooting a TV screen by avoiding striped effect.
IRIS CONTROLS
- available for manual setting goals
IRIS CONTROLS
- available for manual setting goals
METHOD 'IRCUT
- Defines the management of day / night mode. the following options: AUTO LDR (automatic day / night transition
METHOD 'IRCUT
- Defines the management of day / night mode. the following options: AUTO LDR (automatic day / night transition
Depending on the sensor between the LEDs), VIDEO AUTO (automatic day / night transition by analyzing video), COLORS (always
daylight mode) WHITE / BLACK are available ( always night mode). As a rule, we recommend the LDR AUTO option.
