Document:
RE-1D4 TCC5EU
Document:
RE-1D4 TCC5EU
Update:
April 2014
Update:
April 2014
Page:
1
Page:
1
OWNER'S MANUAL
RE-TCC5EU Color Analog camera
Product description
RE-TCC5EU it is a high-performance analog CCTV camera for applications requiring the highest
video quality. E 'based on Sony Super HAD CCD, capable of combining high-resolution color with
great night vision capability and wide dynamic range.
Main features
SONY Super HAD CCD Wide Dynamic Range 1/3 '' high resolution 700 TVL
WIDE DYNAMIC RANGE - The WDR feature allows the camera a better yield in locations
containing different levels of illumination.
Minimum illumination 0.0005 Lux. Not compatible with IR illumination
vertical and horizontal Mirror function for
the
tilting the image in the backward or shooting with camera upside
OSD (On Screen Display), via programming screen MENU controllable with rear buttons.
Titler for
Stamping number
camera
Connections
Video
BNC connector for video output
+ -
(Terminal)
12VDC Power supply
(Terminal)
12VDC Power supply
RS485
(Terminal)
RS 485 port (not used)
(Terminal)
RS 485 port (not used)
IRIS
Connector for auto-iris lenses
PL
Power LED
OSD
Buttons for control of OSD
VIDEO BNC video output - Top left you connect a cable leading to the monitor or DVR,
typically via coaxial cable RG59 BNC connector.
IRIS input for auto iris lens - The camera is able to control auto iris lenses.
+
- -
Connect 12VDC power supply by at least 1A
STABILIZED such as RE-AL4S model. The terminal has two classics of the + and -. And 'it
provided a
adapter cable with
jack
of the plug
feed 5.5 mm.
5 OSD- control buttons With the central button enters the camera setup menu, with the
other buttons you move between the menu items
RS-485 - Not used on this model.
fixing
The camera is provided without bracket which must be purchased separately. The thread for the
bracket is available under the camera both above for ceiling mounting
Power to the camera
On the back of the camera there is a connector for the power supply
(POWER).
Need
connect a
12VDC power supply by at least 1A with 5.5 plug
mm. center-positive, as the model
RE-AL4S
. Attention to use STABILIZED feeders that provide
mm. center-positive, as the model
RE-AL4S
. Attention to use STABILIZED feeders that provide
mm. center-positive, as the model
RE-AL4S
. Attention to use STABILIZED feeders that provide
12V in any load condition. The use of a different supply voltage from 12VDC can generate video
disorders and in the worst cases damage the camera.
If implemented centralized supply pay attention to the power cables are too long, which could
introduce excessive voltage drop.
Connect the video
The video output is on the rear of the camera and has a BNC type connector. It must be
connected to the monitor or video management device. If the distance to be covered is a few
meters you can use any type of cable. But if you go over 10 meters we recommend using the
coaxial cable type RG59 or similar which also allows the wiring over a hundred meters. E 'can
also traferire the analog video signal on twisted pair cable using special converters balun
RE-BNCRJ1
Attach the lens
These cameras are supplied without lens so that you can equip with the lens more suited to the
size and to the ambient brightness. The attack to the target is C / CS type. The goal must be
purchased separately and is screwed on the front of the camera. If the lens is of the iris type
must be connected to the connector socket to the rear view camera. The camera is capable of
controlling autoiris Direct Drive goals. If you need to bring their own to the connector solder
these are the PIN to use:
PIN DIRECT
1
DAMP - 2
DAMP + 3
DRIVE + 4
DRIVE -
Once the lens is screwed, it is necessary to
proceed to the focus adjustment.
Since the camera can accommodate any type
of lens must be adjusted first
there
focal distance from the CCD acting
on
ferrule
threaded connector on the front of the
camera. To do
this is necessary to loosen the retaining screw placed over the