Document:
DK-V2M 2A2
Page
: 3
DK-V2M Dash Cam Car Camera
USER MANUAL
sufficient capacity to allow normal use without power.
Each time the camera is turned on, it automatically starts recording.
Turn off the dashcam and monitor
To turn off the camera completely, press and hold the ON / OFF
button (1) for a few seconds. A sound pattern confirms that the
device is turned off.
The connection cable is included. On the camera side there is a red
cable that you can connect to the positive that turns on the rear
lights to automatically bring the rear camera to full screen when
reverse gear is engaged. If you don't want this feature you can
leave the red cable unused.
ATTENTION. If the GUARD / PARKING function is active, the camera
restarts automatically when a shock is detected.
To turn off the screen only and keep the camera running, briefly
press the ON / OFF button (1). Switching off the screen is
recommended in surveillance during parking to conserve the
battery. To turn the monitor back on, you can press the ON / OFF
button again or touch the touchscreen.
Touchscreen control
This dashcam is equipped with a large 12 ”touchscreen that
simulates the rear view mirror. The home screen shows the rear
view camera in full screen by default and this will also be the setting
you will keep while driving as the vehicle's original mirror is no
longer usable.
In this way, the dashcam offers a better view of the normal rear-
view mirror, not suffering from obstacles placed on the rear seat.
can
drag your finger on the screen to the right or left
to change
the camera on screen or also to activate the dual view of the
cameras
Turn on the camera
The camera turns on automatically when it receives power through
the USB port and turns off in seconds if it fails. If you only supply
power to the camera when the vehicle is running, it will turn on and
off together with the vehicle.
If you supply power to the camera continuously you will instead
have to turn the camera on and off manually by holding down the
power button (1) for a few seconds.
This model also supports both types of power supplies when
installed with the installation kit for the fuse box.
You can also
drag your finger up or down
to change the viewing
angle up or down.
Touching the screen briefly displays the brightness control bar at
the top of the screen
And the control menu bar at the bottom
TO
B.
C.
D.
AND
F.
G.
A - Activates and deactivates audio recording B - Changes
the camera shown on the screen C - Accesses playback of
recordings
D - Activate and Stop recording E - Take
an instant photo
F - Protects the recording video from overwriting. G - Accesses
the settings
The camera has an internal battery which is used to allow the
camera to stop safely when the power fails and also for operation
in parking mode. The battery does not have
DSE srl - Digital Surveillance Equipment - www.dse.eu