DSE DK-CH1EZ Owner'S Manual Download Page 2

 

Document: 

DK-CH1EZ 1M8  

Document: 

DK-CH1EZ 1M8  

Document: 

DK-CH1EZ 1M8  

Page:

 2 

Page:

 2 

OWNER'S MANUAL

DK-CH1EZ hidden camera with video recorder

DSE srl - Digital Surveillance Equipment - www.dse.eu     

off, you can turn on your wifi manually: just briefly press the middle button B. To verify that the wifi 
is running controls that the blue LED lights flashing (in wifi access point mode) or fixed (wifi 
connected to the external AP).  

Download the app to configure 

DK-CH1EZ was developed to be controlled remotely via wifi with a mobile phone or tablet. It is 
not necessary to have a wifi network to use DK- CH1EZ because the device comes factory in 
acccess POINT mode and generates itself a wifi network to which you can connect with portable 
devices Android / iOS. First you have to download from Google Play or Apple Store application

 DSE

devices Android / iOS. First you have to download from Google Play or Apple Store application

 DSE

IoVedo.EZ,

 available for free for Android and iOS. To use the program see specific manual . At first 

IoVedo.EZ,

 available for free for Android and iOS. To use the program see specific manual . At first 

IoVedo.EZ,

 available for free for Android and iOS. To use the program see specific manual . At first 

IoVedo.EZ,

 available for free for Android and iOS. To use the program see specific manual . At first 

you will be required to access

set up a 

password protection that you will not forget. 

Format the SD card with the app  

Once logged in with the app, you can intervene in the DVR configuration and possibly also hook 
the DVR to your power network wifi.per also access it through the Internet. 

The first step you need to do is to format the SD card in the registration setting button. With the 
app you can then set the automatic recording mode that allow the DVR

to record 

automatically immediately after the ignition. 
All these operations are explained in detail in the application manual that you find on the CD. 

Registration with active Wi-Fi

When the wireless DVR records according to its automatic option is active you can 

set with the app. The

REC button (A) is not working with wifi enabled. Through the app you can set the continuous 
recording mode, timer and motion detection as explained in the app manually.

Recording without Wi-Fi

You can choose to turn off the wireless device and use it only as a manual DVR. To turn off the 
wifi briefly press the button B. The blue LED turns off. Now you can start and stop recording with 
the key A. The red LED that flashes slowly indicates registration in progress, fixed indicates 
registration in stand-by. Note that the key A manual recording is active only with wifi off as with 
wifi active DVR records based on automatic settings that you can define with the app.

The DVR is able to remember if you turned off the wifi and the next power will not turn on 
automatically. 

Resetting the DVR 

In case of failure can make a RESET by pressing with a pointed object the small button in the 
hole B. The DVR is switched off.  

Restoring the DVR factory settings 

In case of need it is a restoration of the factory configuration can be made by pressing the small 
button in the hole A for 10 seconds. The DVR will return to the Access Point mode factory and will 
require access to the first to set a new password.

Movie Playback on PC   

To review and manage files recorded by the DVR, you need a computer and a SD card (not 
supplied).  

We must shut down the DVR C ON / OFF button, remove the micro SD card and insert it into an 
SD card reader to the computer. 

And 'possible to copy movies on your PC and play them back with any video player 
(recommended VLC - VideoLAN). 

E 'can also play video files directly from the SD card, without copying them to your PC, but may 
affect the quality of play so we recommend this procedure 

just for 

get 

preview, then download movies of interest. CAUTION: You can not download files using the USB 
cable DVR because this is used for the single charge / power supply unit. E 'can also download 
the files by APP

Vibration  

The DVR can emit vibrations to report their status. By default the only vibration is enabled at 
power.

To enable all the vibrations stop recording and press the A button for 5 seconds 

To disable vibration, except at boot stops recording and press the B button for 5 seconds 

Vibration alert 

POWER: Vibration short OFF: Long vibration START RECORDING: Long vibration 
STOP RECORDING: Vibration short WIFI ON: Long vibration WIFI OFF: Vibration short 
OFF DURING RECORDING .: Vibration short POWER DURING RECORDING .: long 
Vibration 

Main technical features 

Sensor 

CMOS 

maximum resolution 

Full HD 1080p (1920x1080) 

Frame rate 

25 f / sec 

video Format 

MOV (H.264 compression) 

overlay 

Time Date (non-excludable) 

Functions 

Continuous Recording Motion Recording 
Timer Recording 

WiFi Control 

Capacity 10 m. 

audio Microphone 

incorporated 

audio Speaker 

-

video Archiving  

Approximately 256 hours on 128GB 1080P 

Temperature 

of 

operation 

- 5 ° + 40 ° C 

Memory 

MicroSD Class 10 or higher  

Memory Capacity 

4..128 GB 

Notifications 

Vib 3 LED 

Reviews: