manualshive.com logo in svg

DSC PC5015, Installation Manual, Page: 44 / 52

Share
Download
DSC PC5015 Installation Manual Download Page 44

41

is enabled, the programmed Time of Day Timer [371] will not apply.

Test Transmission Interval in Days

: A test transmission will be sent to the monitoring station at the

programmed time of day in Section [371] and at the Interval programmed in Section [370].

4.

1600Hz/Standard Handshake

: With this option enabled the communicator will respond to 1600Hz

handshakes when using the reporting Communication Formats 1 and 2 only. The Standard Handshake
is 1400Hz or 2300Hz.

5.

ID Tone Enabled

: With ID Tone Enabled the panel will pulse a tone on the telephone line to indicate

that the panel is on the line.

6.

2100Hz/1300Hz

: Selectes the frequency of the ID tone that is pulsed on the line. 

Contact your local

telephone company to confirm which setting should be used.

7.

One Time 1-Hr User enabled DLS Window

: When the User enables the DLS Window through [

✱

][6][Master

Code][5] the panel will answer an incoming call for Downloading within the 1-Hr time Window without having
to have Downloading Answer Enabled in Section [401]. After a successful Download has been completed
the Window will be closed and a call will not be answered unless Downloading Answer is Enabled.

Full 6-Hr User enabled DLS Window

: When the User enables the DLS Window through [

✱

][6][Master

Code][5] the panel will answer an incoming call for Downloading within the 6-Hr window. The window
will remain open for the full 6 hours.

8.

Bell on FTC when Armed

: When enabled, an FTC (Failure to Communicate) on either Partition during the

armed period will sound an Audible Alarm for the length of Bell time-out or until the system is disarmed.

FTC Trouble only when Armed

: If a Failure to Communicate trouble is generated while the panel is

armed only the keypad buzzer will sound trouble beeps every 10 seconds until a key is pressed.

5.31.4

[703] Delay Between Dialing Attempts

The 

Delay Between Dialing Attempts

 timer adds a delay before the next call is dialed (after step d in the

Force Dialing section, or after a busy tone is detected in the Busy Tone Detection section).

P R O G R A M  D E S C R I P T I O N S

Summary of Contents for PC5015





















































Reviews:

No comments