DSC Alarm PC5401 Serial Module
/9
$DSC ->{zone_now_open}
$DSC ->{zone_now_restore}
$DSC ->{zone_now_tamper}
$DSC >{zone_now_tamper_restore}
$DSC ->{zone_cmd}{1..64}
$DSC ->{zone_msg}{1..64}
$DSC ->{zone_status}{1..64}
$DSC ->{zone_time}{1..64}
$DSC ->{zone_epoch}{1..64}
$DSC ->{partition_now}
$DSC ->{partition_now_cmd}
$DSC ->{partition_now_msg}
$DSC ->{partition_now_mod}
$DSC ->{partition_now_status}
$DSC ->{partition}{1..4}
$DSC ->{partition_cmd}{1..4}
$DSC ->{partition_msg}{1..4}
$DSC ->{partition_status}{1..4}
$DSC ->{partition_time}{1..4}
$DSC ->{partition_epoch}{1..4}
$DSC ->{ring_time}
$DSC ->{ring_epoch}
$DSC ->{ExtTstatTemp_now}
$DSC ->{ExtTstatTemp_now_number}
$DSC ->{IntTstatTemp_now}
$DSC ->{IntTstatTemp_now_number}
Table 4 - MH DSC Variables
3.2.3
Command List and Data Format
Its possible to send a few commands to the DSC alarm the following show the syntax and the table
specify which commands are available.
Syntax:
$DSC->cmd("
Command
",
Send_Value
)
Example:
