NS-NH8100 - Installation & User Guide
2
2.0 U
N PA CK ING
AND
I
N ST AL LA TIO N
This section provides unpacking and installation information.
2.1 Unpacking
Open the shipping cartons of the HS-NH8100 and carefully unpack the contents.
The carton should contain:
•
One HS-NH8100 8-port 10/100M Fast Ethernet Switch
•
One external power adapter
•
One Installation and User’s Guide
If any item is missing or damaged, contact your local distributor for repair or
replacement.
2.2 Installation
Installing the HS-NH8100 in a Concourse Cabinet
1.
Attach the HS-NH8100 to the optional mounting plate HS-HUB100-BRKT
as per instructions included with the mounting plate.
2.
Choose a suitable mounting location for the HS-NH8100 inside the Con-
course cabinet. We recommend the bottom left corner.
3.
Align the two mounting tabs on the plate with the holes in wire raceway and
insert.
4.
Snap the module into place by pushing the opposite side towards the back of
the cabinet.
3.0 I
D EN TIFYING
E
XTER NA L
C
OMPO NENTS
This section identifies the major features of the front and rear panels of the HS-
NH8100.
3.1 Front Panel
Power Indicator (PWR)
This indicator lights green when the hub is receiving power, otherwise ir is off.
Loop Detect (LOOP)
When this indicator lights amber, a loop has been detected, this indicates that the
network needs to be re-configured.
firealarmresources.com