background image

Escort5580TC/

VPM5580TC

X

1

X

2

RS

+V

X

2

X

1

RS

+V

RS1

RS2

CLK1

CLK2

24V(c)

24V

R

G

W1

Y1

24V(c)

24V

G

W1

Y1

Auxiliary Heat

Compressor

Fan

Power - Hot

Power - Common

Heat Pump 

System #1

HS-EMS400 #1 

(Backplate)

LED1

LED2

X

2

X

1

RS

+V

RS1

RS2

CLK1

CLK2

24V(c)

24V

R

G

W1

Y1

24V(c)

24V

G

W1

Y1

Auxiliary Heat

Compressor

Fan

Power - Hot

Power - Common

Heat Pump 

System #2

HS-EMS400 #2 

(Backplate)

LED1

LED2

O

O

To X2 terminal on Thermostat 3# and #4

To X1 terminal on Thermostat 3# and #4

O

O

Reversing Valve - Cool Mode

B

Reversing Valve - Heat Mode

B

B

B

Reversing Valve - Cool Mode

Reversing Valve - Heat Mode

Warning! Connect Escort/VPM RS+V to first thermostat only. Do not remove the internal jumper (shunt).

Connect to O or B terminal as specified by equipment. Do NOT connect to both O and B terminals.

Fig 3. Wiring Diagram for Multiple Heating/Cooling Systems with Multiple HS-EMS400 Thermostats

Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months from
the date of purchase, the product shall be free of defects in material and workman-
ship under normal use and that in fulfilment of any breach of such warranty, Dig-
ital Security Controls Ltd. shall, at its option, repair or replace the defective
equipment upon return of the equipment to its repair depot. This warranty applies
only to defects in parts and workmanship and not to damage incurred in shipping
or handling, or damage due to causes beyond control of Digital Security Controls
Ltd. such as lightning, excessive voltage, mechanical shock, water damage, or
damage arising out of abuse, alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original purchaser, and is and shall
be in lieu of any and all other warranties, whether express or implied and of all
other obligations or liabilities on the part of Digital Security Controls Ltd. This
warranty contains the entire warranty. Digital Security Controls Ltd. neither

assumes repsonsibility for, nor authorizes any other person purporting to act on its
behalf to modify or to change this warranty, nor to assume for it any other war-
ranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or
consequential damages, loss of anticipated profits, loss of time or any other losses
incurred by the buyer in connection with the purchase, installation, operation or
failure of this product.

WARNING: DSC Ltd. recommends that the entire system be completely tested
on a regular basis. However, despite frequent testing, and due to but not limited
to, criminal tampering or electrical disruption, it is possible for this product to
fail to perform as expected.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security
Controls Ltd. could void your authority to use this equipment.

This equipment generates and uses radio frequency energy and if not installed and
used properly, in strict accordance with the manufacturer’s instructions, may cause
interference to radio and television reception. It has been type tested and found to
comply with the limits for Class B device in accordance with the specifications in
Subpart “B” of Part 15 of FCC Rules, which are designed to provide reasonable pro-
tection against such interference in any residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause interference to television or radio reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Re-orient the receiving antenna

Relocate the alarm control with respect to the receiver

Move the alarm control away from the receiver

Connect the alarm control into a different outlet so that alarm control and

receiver are on different circuits.

If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet pre-
pared by the FCC helpful: “How to Identify and Resolve Radio/Television Interfer-
ence Problems”. This booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402, Stock # 004-000-00345-4.

firealarmresources.com

Summary of Contents for HS-EMS400

Page 1: ...all optional setback and indoor outdoor remote sensors if used 7 Replace the thermostat by inserting the tabs into the hinge slots at the top of the backplate Gently swing the thermostat downward and snap it into place 8 Replace the thermostat cover Thermistor Position When placing the front cover on the thermostat ensure that the thermistor is not touching the case The thermistor should be placed...

Page 2: ... CLK2 Use with dry contact relay for alternate set points RS2 To Outdoor Indoor remote sensors RS1 To Outdoor Indoor remote sensors RS V To Outdoor Indoor remote sensors and to Escort5580TC VPM5580TC X2 To Escort5580TC VPM5580TC X1 To Escort5580TC VPM5580TC W1 Auxiliary heat is energized as back up or emergency heat Y1 Compressor is energized with a call for heating or cooling G Fan is energized w...

Page 3: ... warranty nor to assume for it any other war ranty or liability concerning this product In no event shall Digital Security Controls Ltd be liable for any direct indirect or consequential damages loss of anticipated profits loss of time or any other losses incurred by the buyer in connection with the purchase installation operation or failure of this product WARNING DSC Ltd recommends that the enti...

Page 4: ...ected setpoints in heating and cooling NOTE The thermostat will not allow less than 1 C 2 F difference between the heating and cooling setpoints Fan Control The Fan will come on automatically when the system is operating but there is no indication of this on the display To select continuous Fan operation press the FAN button and the display will show This is recommended for electronic air cleaners...

Reviews: