background image

2

System Information

Fill out the following information for future reference and store this manual in a safe place.

Access Codes

Your Master Code is: __________________________________________

Additional Access Codes:

01 __________________

09 ____________________

17 ____________________

25 ________________

02 __________________

10 ____________________

18 ____________________

26 ________________

03 __________________

11 ____________________

19 ____________________

27 ________________

04 __________________

12 ____________________

20 ____________________

28 ________________

05 __________________

13 ____________________

21 ____________________

29 ________________

06 __________________

14 ____________________

22 ____________________

30 ________________

07 __________________

15 ____________________

23 ____________________

31 ________________

08 __________________

16 ____________________

24 ____________________

32 ________________

Zone Information

There are ________ active zones on the system.

Zone

Protected Area

Zone Type

1

___________________________________________

_____________________________________

2

___________________________________________

_____________________________________

3

___________________________________________

_____________________________________

4

___________________________________________

_____________________________________

5

___________________________________________

_____________________________________

6

___________________________________________

_____________________________________

7

___________________________________________

_____________________________________

8

___________________________________________

_____________________________________

[F] FIRE __________________________________________

[A] AUXILIARY ____________________________________

[P] PANIC ________________________________________

The Exit Delay Time is ________ seconds.

The Entry Delay Time is ______ seconds.

15

1. Are all electrical appliances and outlets in a safe condition? Check for frayed cords, overloaded

lighting circuits, etc. If you are uncertain about the condition of your electrical appliances or
household service, have a professional evaluate these units.

2. Are all flammable liquids stored safely in closed containers in a well ventilated cool area? Cleaning

with flammable liquids should be avoided.

3. Are fire hazardous materials (matches) well out of reach of children?

4. Are furnaces and wood burning appliances properly installed, clean and in good working order?

Have a professional evaluate these appliances.

Fire Escape Planning

There is often very little time between the detection of a fire and the time it becomes deadly. It is thus
very important that a family escape plan be developed and rehearsed.

1. Every family member should participate in developing the escape plan.

2. Study the possible escape routes from each location within the house. Since many fires occur at

night, special attention should be given to the escape routes from sleeping quarters.

3. Escape from a bedroom must be possible without opening the interior door.

Consider the following when making your escape plans:
• Make sure that all perimeter doors and windows are easily opened. Ensure that they are not

painted shut, and that their locking mechanisms operate smoothly.

• If opening or using the exit is too difficult for children, the elderly or handicapped, plans for

rescue should be developed. This includes making sure that those who are to perform the rescue
can promptly hear the fire warning signal.

• If the exit is above the ground level, an approved fire ladder or rope should be provided as well

as training in its use.

• Exits on the ground level should be kept clear. Be sure to remove snow from exterior patio doors

in winter; outdoor furniture or equipment should not block exits.

• Each person should know of a predetermined assembly point where everyone can be accounted

for i.e.: across the street or at a neighbour's house. Once everyone is out of the building, call the
Fire Department.

• A good plan emphasizes quick escape. Do not investigate or attempt to fight the fire, and do not

gather belongings or pets as this wastes valuable time. Once outside, do not re-enter the house.
Wait for the fire department.

• Write the fire escape plan down and rehearse it frequently so that should an emergency arise,

everyone will know what to do. Revise the plan as conditions change, such as the number of
people in the home, or if there are changes to the building's construction.

• Make sure your fire warning system is operational by conducting weekly tests (see “Fire Alarm

Operation” on page 14). If you are unsure about system operation, contact your installing dealer.

• We recommend that you contact your local fire department and request further information on fire

safety and escape planning. If available, have your local fire prevention officer conduct an in-
house fire safety inspection.

Summary of Contents for CLASSIC PC1555











Reviews: