DSC ALEXOR, User Manual

Page: 14 / 24

10
Late to Open
This features allows a user to be notified if their alarm system is not disarmed by a programmed
time of day.
NOTE: The Late to Open feature requires the monitoring station to forward calls to the user. Verify
with the installer whether this function is active.
[9] Late to Open Enable/Disable
This Late to Open feature enables or disables the Late to Open time programmed in [0].
It is typically used to track children after school. For example, if the parents get home from work
at 5pm, and a child gets home at 4pm. The programmable timer could be set for 4:15. If the
system is not disarmed at this time an alert would be sent to the monitoring station.
The keypad will display ’Late to Open is Enabled’ and sound 3 beeps if
is pressed within
the User Functions menu when this feature is off. The LCD keypad will display ’Late to Open is
Disabled’ and sound an error tone if is pressed within the User Functions menu when this
feature is on.
[0] Late to Open Time of Day
This function is used to program the time setting enabled in [9]. This function programs the
’Late to Open’ time of day for all 7 days of the week.
• Valid entries for these sections are 00:00 – 23:59.
• Entering 99:99 will disable the Late to Open feature for the current day.
• After entering
[Master Code] , beeps will be sounded and ’Press (
4
) for < > Sun-
day’ will be displayed on the keypad.
• Pressing the right scroll button displays the days of the week, from Sunday to Saturday.
While in the Late to Open menu, entering keys 1-7 will also select each day from Sunday to
Saturday, respectively.
• If is pressed to select a day of the week, no beeps will be sounded and the keypad will
display ’Set 24hr Time’ ’Enter HH:MM 9999’. If is pressed from this menu, the user will
be returned to the previous Late to Open menu.
• If the Alarm System is armed in any mode when the late to open time matches the time of day,
Late to Open will be logged to the event buffer and communicated to the monitoring station.
Two-Way Wireless Key (WT4989, WT8989)
The Two-way Wireless Key communicates directly with the control panel, performing many of the
functions that a wireless keypad performs. Please refer to the WT4989/8989 Operating instruc-
tions for more information.
The WT4989 and WT8989 has 4 function keys programmable for 6 functions each, an LCD icon
display that can display system status using a combination of 7 icons and an internal buzzer.
Unless custom programmed by your installer the functions are as follows:
Function Keys
Status Request - Press this button for 1 second to view the control panel system
status via the LCD display icons.
Stay Arming - Press to arm your system in Stay mode. All perimeter zones are active
but interior zones remain inactive.
Away Arming - Press to arm your system. Interior and exterior zones will be armed.
Disarm - Press to disarm your system.
Panic Alarm - Press & hold for 3 seconds to create a panic alarm on the security system.
* Command Output 1 - Press & hold both buttons at the same time for 3 seconds to
activate the assigned output.
*
Command Output 2 - Press & hold both buttons at the same time for 3 seconds to
activate the assigned output.
!
!