You must be very careful when disassembling the old power supply and installing the new
one.
Life-threatening high voltages
are present if you forget to unplug the power supply.
You should also wait a while for the voltages to dissipate before dismantling the old power
supply.
You are responsible for this yourself, Pro Audio Parts and/or DSA-AVL can never be held
responsible for damage.
If you work neatly, accurately and with attention, then it is a fairly simple procedure.
Always work without the mains plug being connected.
If you have doubts about your skills, buy the power supply and have it installed by a skilled
electronics technician.
Summary of Contents for PSU-2.0
