DS18 DSP8.6iA, Owner'S Manual

Page: 4 / 12

O PERATIONS & CONTROLS
NO.
Low Level Signal Output Terminal - Support maximum 2 channels
Optical Stereo Digital Signal Input Port
Switching amplifier audio source to optical input can play stereo digital signal output
from vehicle CD or external sound source. Optical sampling rate supports 24 Bit / 96 KHz.
External Wired Controller Port
Using standard accessory wired controller, you can select input source select presets,
adjust total volume and slave volume, Mute, and switch between the last song and the
next song from Bluetooth/USB Drive.
AUX Lower Signal Input Terminal - Support 2 channels RCA stereo input.
High Level signal input (Ch5, Ch6)
Auto Turn ON/OFF Control Model Options
For auto turn on/off mode, it offers three options: DC OFFSET/REM/AUDIO.
REM: When switched to REM, the remote control output terminal of the OEM source
unit is connected to the REM IN terminal of the DSP / amplifier, which is the preferred
starting method.
DC Offset: If the OEM source unit has no REM signal output, you can choose DC
OFFSET mode. DC OFFSET can turn on/off amplifier by detecting the 6V DC Offset
from the OEM source unit terminal.
Audio: This mode controls the power switch by detecting audio signals from the
source unit. When using this mode, please pay attention to the volume settings of the
source unit.
2
Output (speaker outuput)
DSP8.6iA has a built-in high power 6ch class AB amplifier.
CH 1,2,3,4 can output 80Wrms each channel @ min load 4 ohm
CH 5, 6 can output 80Wrms each channel @ 4 ohm; or 120Wrms each channel
@ min load 2 ohm: CH 5, 6 can also be bridged to output 240Wrms @ 4 ohm
High Level signal input and Speaker output (Ch1, Ch2, Ch3, Ch4)