DEVICE PORTS AND FEATURES
USB
PWR
RF Input (SMA)
(PWR Meter / Freq Counter)
Generator / Divider Output
(SMA)
Power and Data
(USB Type-C 1Amp)
TT7000
Change system mode
button
Value step +/- buttons
The MAXIMUM power to the RF input SMA port is
+15dBm
. Never apply over the
maximum level or permanent damage can occur.
Power measurements will be
inaccurate
if the automatic counter cannot determine an
approximate frequency. Use the PC GUI to manually enter the frequency range of your
signal if auto-range is not consistent.
If the power level is too low or there is no signal input, the frequency counter display will
wonder. This is normal functionality.
The TT7000 requires USB current of up to
1.0 Amps
. An unpowered USB hub or an
excessively long or low quality USB cable will degrade the device performance. We
recommend a USB 3.0 port, a powered hub, or a short high-quality cable from a charging
USB port.
NOTES AND WARNINGS
TT7000
– RF Meter / Counter / Generator - User Guide
www.dsinstruments.com
10MHz reference input
–
(MCX jack)
OLED Display
Status Indicator
