![background image](http://html.mh-extra.com/html/ds-produkte/ka-6526/ka-6526_instruction-manual_2533483029.webp)
29
Before the
fi
rst use
Before using the appliance you must:
• unpack the scope of supply,
• clean the appliance (see the chapter "Cleaning and storage").
Unpacking
ATTENTION!
❐
Keep children and animals away from the packaging material. There is a risk of suf-
focation!
Unpack all parts and check the scope of supply for completeness (see the chapter "Scope
of supply and equipment overview") and for transport damage. If there is any damage to
some of the parts, do not use them(!), but contact our customer service .
Accessories
Stirrer blade
The stirrer blade is particularly suited for mincing and mixing hard foodstuff or liquids. It
is already
fi
tted in the food container when the appliance is delivered.
Blade protection
The stirrer blade protection is particularly suited for mincing and mixing soft foodstuff or
liquids. If you want to use the blade protection, proceed as follows:
1. Remove the stirrer blade from the food container. Unscrew the wing nut at the bottom
of the food container counter clockwise. You can now remove the stirrer blade from
the food container. Only handle the stir blade on the cone.
2. Attach the blade protection to the stirrer blade with a slight
offset, as shown. The blade protection must latch in. The
turn the blade protection clockwise until the latch of the
blade protection are positioned underneath the blades of
the stirrer insert.
3. Insert the stir insert into the food container and tighten the
wing nut from below.
Stirrer
The stir insert is particularly suited for kneading dough, warming up milk and preparing
pudding. It must never be used without blade protection. If you want to use the stir insert,
proceed as follows:
1. Attach the blade protection to the stirrer blade as described in the section "Blade
protection".