![background image](http://html.mh-extra.com/html/ds-produkte/01365/01365_manual_2533559025.webp)
27
EN
After Use
1. After ironing, move the On / Off switch for steam (
6
) to the
position (steam off) and
the temperature control dial (
17
) to the
MIN
position.
2. Place the device on the station or vertically on the base (
3
).
3. Remove the mains plug from the plug socket.
4. Allow the bottom of the iron (
2
) to cool down completely.
5. Once the device has cooled down, empty the water tank (
14
):
–
open the water tank cap (
5
),
–
hold the iron over a sink or similar outlet and
–
turn it upside down until all of the water has run out.
6. Plug the mains plug back into the plug socket and place the iron on the station.
7. Move the temperature control dial to the highest setting (
MAX
) for one to two minutes.
8. Move the On / Off switch for steam to the
position (steam on) so that the rest of
the water evaporates. Repeat steps 1 to 4.
Cleaning
PLEASE NOTE!
■
Do not use any metal objects to remove dirt from the bottom of the iron.
■
Surfaces could be damaged!
Do not use any corrosive or abrasive cleaning agents
or scouring sponges to clean the device.
■
Never pour any descaling or cleaning agent into the device. This may destroy the
device and safe working is no longer guaranteed.
1. Ensure that the station is no longer connected to the mains power and the bottom of
the iron (
2
) has cooled down.
2. Wipe down the iron and the station with a soft cloth. More intense soiling can be re-
moved with a damp cloth and a little cleaning agent if required.
3. If necessary, allow everything to dry completely or dry with a soft cloth.
Self-Cleaning Function
PLEASE NOTE!
■
CAUTION – Danger of scalding!
Hot water and steam will emerge from the bottom
of the iron during the self-cleaning process. Keep the bottom of the iron away from all
body parts and delicate materials when the self-cleaning button is pressed!
■
Only ever press the self-cleaning button to perform self-cleaning and not dur-
ing ironing!
The device has a self-cleaning function allowing limescale residues to be removed from
the device. Additional descaling of the device is not necessary.