![background image](http://html.mh-extra.com/html/ds-produkte/00908/00908_instruction-manual_2533412014.webp)
EN
14
Danger of Electric Shock and Fire
■
Only connect the device to a properly installed socket with protective earth contacts.
The socket must also be easily accessible after connecting so that the mains con-
nection can be quickly disconnected. The mains voltage must correspond to the
technical data of the device. Only use proper extension cords, whose technical data
correspond to those of the device.
■
Lay the mains cord in such a way that it does not become squashed or bent and does
not come into contact with hot surfaces (this also applies to the hot surfaces of the
device!).
■
Never immerse the device, the mains cord and the plug in water or other liquids and
make sure that there is no risk of them falling in water or getting wet.
■
If the device falls in water, immediately disconnect the power supply. Do not attempt
to pull the device out of the water when it is connected to the mains supply!
■
Never touch the device, the mains cord and the mains plug with wet hands when
these components are connected to the mains supply.
■
Turn the device off and pull the mains plug out of the socket if a fault occurs during
operation or before a storm.
■
Always pull on the plug itself and never on the mains cord!
■
Only use the device in enclosed areas.
■
Do not use the device in rooms containing easily
fl
ammable dust or toxic and explo-
sive vapours.
■
Maintain adequate distance to heat sources such as stoves or ovens to prevent dam-
age to the device. Do not place any open
fl
ames, e.g. burning candles, in the direct
vicinity of the device, cord and plug.
■
Do not operate the device in very moist environment or in the vicinity of
fl
ammable
material.
■
For your own safety, always check the device for damages prior to using it. Only use
the device if the device, mains cord and the plug do not exhibit any damages!
Avoiding damage to materials, property and the device
■
Always place the device on a dry, level,
fi
rm and heat resistant surface.
■
Do not allow the cable to hang over the edge of a table or kitchen worktop. Someone
could catch him/herself and pull down the device.
■
Only use the device if it has been correctly assembled! Each time before use, check
whether the
fi
lter compartment and the
fi
lter have been correctly inserted and wheth-
er the water tank has been properly
fi
lled!
■
Take note of the
fi
lling capacities (that is, the MIN and MAX mark) for the water tank!
Fill the water tank at least up to the MIN mark and no further than the MAX mark!
■
Never use the device if there is no water in the water tank!
■
Never add milk or other liquids to the water tank. Only use water to make espresso!
■
Do not over
fi
ll the coffee
fi
lter.
■
Never use the device unless there is a suitable container under the coffee spout.
■
Only use accessories included in the product contents or exclusively those recom-
mended by the manufacturer.