Dryflow DFLIF02 User Manual Download Page 2

Before installing, be sure to read this installation manual and retain for future reference.

This product must be installed by qualified personnel in accordance with the instructions given in 

this manual and installation must comply with all applicable regulations, national security 

standards and laws in force in the country where the product is installed.

Turn off the power at the main switch before installing or servicing the dryer unit.

The dryer must not be installed on a flammable surface. Do not damage any parts of the electrical 

connections.

Pre-arrange  an  appropriate  power  outlet  and  a  system  of  disconnection  in  accordance  with 

current  local  regulations.  Make  sure  the  product  is  properly  connected  to  ground.  If  there  is  no 

ground connection, there is a risk of an electrical shock.

Do  not  install  the  dryer  over  a  washbasin.  If  the  power  cord  is  damaged,  it  must  be  repaired  by 

qualified personnel to avoid any type of risk.

This dryer can be used by children aged 8 years and above. People with reduced physical, sensory 

or mental abilities or lack of experience and knowledge, if they have been given supervision and 

appropriate training regarding the use of the dryer in a safe manner, can use it with no restriction. 

Children should not play with the apparatus. Cleaning and 

maintenance performed by the owner should not be done without children having supervision.

During use, temperatures above 158

  [70

may develop in the parts near the hot air nozzle. Do 

not touch or cover the dryer during use or when finished using it.

General safety information:

W

AR

NING

W

ARNING

W

ARNING

W

ARNING

 

WARNING

 

DANGER

 

WARNING

 

WARNING

This product is intended 

Failure to properly ground

Disconnect power at the

All units must be suppllied

for  installation  by  a  qualified  service  person. 

Use AWG NO.12 solid conductor for wiring.

unit  could  result  in  service  electrical  shock

and/or death.

service breaker before installing or servicing.

with  a  3-wire  service.  The  ground  wire  must

be connected to the dryer’s backplate.

--N

OTE: Do not install dryer over washbasin --

SAFETY WARNINGS

Summary of Contents for DFLIF02












Reviews: