NOTE:
When pressing the slitters through
the laminating film, try cutting a slot in the
film with a utility knife first.
5) Install feedtable on machine. On the same
side of the feedtable, press both wedges in
between the sidepanel and the feedtable. The
wedges will keep the tray from moving and
keep the alignment of the feed guide and
slitters true.
(See Figure 3)
General Specifications:
25"
27"
Height
"
5
1
"
5
1
Width
"
4
3
"
2
3
Depth (with feed tray)
"
0
2
"
0
2
Net weight 120V/240V
.
65 lbs./68 lbs.
66 lbs.
Shipping weight
.s
b
l
2
7
.s
b
l
2
7
Width of Lamination
"
7
2
"
5
2
Electrical: (120V)
120V AC, 60 Hz,
120V AC, 60 Hz,1400w
Electrical: (240V)
SaveYour Carton!
Dry-Lam ships laminators in special cartons which protect them
from damage. Please store your cartons in case your laminator should ever require
servicing.
Remove the laminator
from its box by grasping the housings and pulling up.
Do not use rollers or shafts as handles- this could cause damage.
The power supply cord
should be unplugged from the wall outlet when it is
to be unused for a long period of time.
This manual is provided as an
Operator’s Manual
and covers most situations you
will encounter while using your laminator. It is not a Technical Service manual. For
technical assistance beyond what this manual provides, contact Dry-Lam, at the
Service Center below.
Dry-Lam is a product line of
Dry-Lam
7650 W. 185th. St.
Tinley Park, IL 60477
Phone (708) 614-0211, Fax (708) 614-1266
Important Information
i
21
FIGURE 3
SIDEPANEL
FEEDTABLE WEDGES
FEEDTABLE
Item 25STA(120V)
Item 27STA(120V)
10908 Strang Line Road
Lenexa, KS 66215
Phone (888) 633-1973
