Drucker Diagnostics Owl Manor HORIZON 24 Flex Operator'S Manual Download Page 3

3

For the safety of both the operator and service personnel, care should be taken when 

using this centrifuge if handling substances that are known to be toxic, radioactive or 

contaminated with pathogenic microorganisms. When Risk Group II materials are used (as 

identified in the World Health Organization “Laboratory Bio-Safety Manual”), a Bio-Seal 

should be employed. In the event that materials of a higher risk group are being used, 

more than one level of protection must be provided. The use of flammable or explosive 

materials as well as those materials which have a vigorous chemical reaction is prohibited.

Supplied Accessories (Standard)

See next page for optional rotor/accessories

Model Description

HORIZON is a versatile line of centrifuges designed with 3 

settings to process Chemistry, Coag or Platelet Poor Plasma, 

and Urine specimens in the same unit. The maximum g-force 

of 2,000 xg makes HORIZON compatible with most brands 

of tubes. Cycle settings can be changed to accommodate 

custom setting.

WARRANTY:

Drucker Diagnostics warranties that this centrifuge is free from

defects in workmanship and parts for 2 years.

See the next page for a description of optional accessories.

Also included (not shown):

•  One (1) 6´ Line Cord 
•  One (1) Operator’s Manual

Intended Use

General purpose laboratory centrifuge for sample separation.

WARNING

One (1) 4-Bucket

Horizontal Rotor*

p/n 7786012

Four (4) 1.5" Green Buckets**

p/n 7713107

**for use with Owl Manor 60 mL Products

HORIZON 24 Flex, Owl Manor (00-384-092-000)

Two (2) 1.5” Green Buckets**

p/n 7713107

**for use with Owl Manor 60 mL Products

Two (2) 1.5" Purple Buckets***

p/n 7713037

***for use with Owl Manor 30 mL Products, 

HORIZON 24 Flex, Owl Manor SA (00-384-092-001)

*The horizontal rotors and rotor 

accessories are rated for a rotational 

speed of 3500 RPM (a force of 3200 xg).

200 Shady Lane, Suite 170 – Philipsburg, PA 16866, USA

+1-877-231-3115 (U.S. only) - +1-814-692-7661

[email protected] | druckerdiagnostics.com

THIS IS A UNIVERSAL CENTRIFUGE, COMPATIBLE WITH VOLTAGE 
REQUIREMENTS IN ALL COUNTRIES. THE LINE CORD WILL VARY BY COUNTRY.

Summary of Contents for Owl Manor HORIZON 24 Flex














Reviews: