Copyright 2022 Baker Hughes Company.
18 | DPI 610E Instruction Manual–English
Chapter 1. Overview
1.13.1 Battery Status Indicator
1.14 Power ON/OFF
1.14.1 Power ON
To switch the instrument ON, hold down the power button
for about 2 seconds, until the
Druck Logo splash screen appears.
1.14.2 Power OFF
To switch the instrument OFF, hold down the power button
for about 4 seconds until the
closing screen appears.
1.14.3 Auto Power Down
The instrument has an Auto Power Down feature that can be enabled/deactivated as required.
See General Settings Section 4 on page 43: (on the instrument it can be found under the
General
Settings
screen on the Dashboard).
The battery status indicator (located at the right hand side of instrument)
provides a visual indication of the battery level, even when the instrument
is off. Press the circular button on the right of the display to show the charge:
the display will automatically close down. Each LED represents
approximately 25% battery capacity.
