Copyright 2022 Baker Hughes Company.
12 | DPI 610E Instruction Manual–English
Chapter 1. Overview
1.4 Accessories
Table 1-2 shows common accessories for the DPI 610E series. See Datasheet (BHCS39207) for
a full list of accessories.
1.5 Observance of Manual
Note:
Before operating or using the equipment, read and obey all warnings and cautions given
in the Quick Start and Safety Manual.
1.6 Safety
When performing a procedure or task:
1.
Do not use this instrument for any other purpose than stated in this manual. Incorrect use
may impair safety.
2.
Follow all operating and safety instructions in the Quick Start and Safety Manual.
3.
Use suitably qualified Technicians and good engineering practice for all procedures in this
documentation.
Table 1-2: Common accessories
Part Code
Description
RTD-INTERFACE-485
RTD Interface only (IS area)
RTD-INTERFACE-IS
RTD IS Interface (non-IS area)
RTD-PROBE-485
RTD Interface with PT100 Probe (IS)
RTD-PROBE-IS
RTD Interface with PT100 Probe (non-IS area)
IO-RTD-M12CON
M12 Field Wireable Connector to fit RTD Interface
(IS and non-IS area)
IO-RTD-M12EXT
RTD M12 male to female extension lead 2 m
(6.5 ft) 4-wire
IO-RTD-PRB150
150 mm length 6 mm diameter PT100 steel RTD
probe, Class A
PM700E
Remote Pressure Sensor (IS area)
PM700E-IS
Remote Pressure Sensor (non-IS area)
PM700E-CABLE
Remote Sensor Extension Cable 2.9 m (9.5 ft)
IO620-IDT621-NEW
Bar Dirt and Moisture Trap (IS area)
IO620-IDT621-IS
Bar Dirt and Moisture (non-IS area)
IO610E-CASE
Carrying Case (suitable for IS and non-IS use)
INFORMATION
This manual contains operating procedures and safety
information for the DPI 610E series. It is the responsibility of the customer to
make sure that all personnel operating and maintaining the equipment are
correctly trained and qualified.
INFORMATION
The manufacturer has designed this equipment to be safe
when used as detailed in this manual. Operators should read and obey all local
Health and Safety regulations and Safe Working Procedures or Practices.
