Druck ADTS 403F, Calibration Manual

Page: 35 / 40

Copyright 1996 Baker Hughes Company.
English–ADTS 403/405 Calibration Manual | 25
Appendix A. Quick Reference
[MAIN CAL]
[INTERNAL]
[Ps (abs)]
data entry
[AIM]
[RATE]
[ACTUAL VALUE]
[END CAL]
Go to new pressure set-point.
Set Rate set-point.
Enter actual pressure value.
Complete calibration.
Enter Actual pressure value.
Complete calibration.
Go to new pressure set-point.
Set Rate set-point.
Enter Actual pressure value.
Complete Ps calibration.
Accept Ps changes and calibrate Pt.
Reject Ps changes and return to calibrate Ps.
Complete Pt calibration.
Accept Pt changes and Quit.
Reject Pt changes and return to Pt calibration.
Go to new pressure set-point.
Set Rate set-point.
Type PIN and check date.
Accept changes and Quit.
Reject changes and return to calibration menu.
data entry
data entry
[YES]
[NO]
[Ps (abs)]
data entry
[AIM]
[RATE]
[ACTUAL VALUE]
[END CAL]
data entry
data entry
[YES]
[NO] Accept changes and Quit.
Reject changes and return to calibration menu.
[Ps & Pt (abs)]
data entry
[AIM]
[RATE]
[ACTUAL VALUE]
[END Ps]
data entry
data entry
[YES]
[NO]
[END CAL]
[YES]
[NO]
Key/selection Function and Comments
Enters the calibration menu.