Page
6
DRUCEGROVE Ltd, Unit 12 Abbey Mead Industrial Park,
Brooker Road, Waltham Abbey, Essex EN9 1HU
Phone:
+44 (0) 1992 650486
Fax:
+44 (0) 1992 652226
[email protected]
www.drucegrove.com
Rope Tensioning System
Equator
®
DO NOT MAKE ANY FURTHER ADJUSTMENTS TO EITHER GAUGE.
Move the second gauge onto a second rope.
Adjust the second rope at the lift car rope termination
to obtain the same gauge pointer position as on the
first (reference) rope tension gauge still attached to
the first rope.
Please note: -
The pointer position on the reference gauge will
change during this operation. This is normal.
Remove the gauge from the first rope and place it
onto the third rope.
Adjust the third rope at the lift rope termination to
obtain the same gauge pointer position as on the
second (now reference) gauge.
Remove the gauge from the second rope and place it
on the fourth rope.
Adjust the fourth rope at the lift rope termination to obtain the same gauge pointer position
as on the third (now reference) gauge.
Repeat until all car ropes have been checked,
alternating the reference gauge.
Repeat steps 1 – 10 for the Counterweight ropes.
Run the lift one complete trip and recheck all rope tensions using one gauge only.
If necessary, repeat steps 1 – 10.
ROPE TENSION ADJUSTMENT IS NOW COMPLETE.
4
5
6
7
8
9
10
11
12
DRUCEGROVE Ltd, Unit 12 Abbey Mead Industrial Park,
Brooker Road, Waltham Abbey, Essex EN9 1HU
Phone:
+44 (0) 1992 650486
Fax:
+44 (0) 1992 652226
[email protected]
www.drucegrove.com
