1 1
English
L
A R G O
-
I N S T R U C T I O N
F O R
I N S TA L L AT I O N
6.8.2 Air inlet guides
The air inlet guides are located at the bottom (side) of the tray surrounding the burners (see
Fig. 8
).
Remove as follows (see
Fig. 8 and Fig. 9
):
➠
Take the tray surrounding the burners out of the appliance.
➠
Unscrew and remove the 4 self-tapping screws.
➠
Remove the air inlet guides.
➠
Fit the tray surrounding the burners back in the appliance.
6.8.3 Primary aeration of the burner
N.B.
Adjusting the primary aeration applies only to appliances used in Belgium.
Removing the middle (main) burner provides access to the baffl e used to adjust the primary aeration (see
Fig.
10).
Follow the procedure below:
➠
Remove the tray around the burners (see
Fig. 8
).
➠
Unscrew the 2 self-tapping screws at the end sides of the middle (main) burner.
➠
Remove the burner from the appliance.
➠
Unscrew the 2 self-tapping screws in the baffl
e (
Fig. 10, 1
).
➠
Slide the baffl
e as far as possible in the direction of the injector (see
Fig. 10
, arrow).
➠
Retighten the self-tapping screws.
➠
Fasten the burner to the appliance with the self-tapping screws.
➠
Fit the tray surrounding the burners.
Photo 1
Photo 2
Photo 3
USBZTVSSPVOEJOHUIFCVSOFST
D
Fig. 8
D
"JSJOMFUHVJEFT
Fig. 9
Fig. 10
U K
