INSTRUCTIONS
FOR USE
Pump 888 - Rollo
DROPSA SpA
In accordance with point 1.7.4, to I, Dir. 98/37 CE
Section:
0.0 INTRODUCTION
1.0
DESCRIPTION OF THE PUMP
2.0 TECHNICAL
SPECIFICATIONS
3.0 CORRECT
USE
4.0 INSTRUCTIONS
FOR
ORDERING
AND DISTRIBUTORS
DECLARATION OF CONFORMITY
Catalogue P/N C2020IE - Wk 23/02
Registered name
DROPSA SpA
Address
Via B. Croce 1, 20090 Vimodrone (MI), Italy
Model
Pump 888 - Rollo
Year of manufacture
1999
Marking CE
0.0 INTRODUCTION
This user’s and maintenance manual refers to the
pump 888 - Rollo
, for use in progressive type lubrication systems
mounted on trucks, buses, refuse compactors and other types of machinery equipped with a 24 VDC electrical power
supply.
It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to
consult it.
To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at
Dropsa SpA.
The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of
hydraulics, mechanical and electrical systems.
The manufacturer reserves the right to update the product and/or the user’s manual without the obligation to revise
previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.
The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event
of any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.
DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of
