7
9. MAINTENANCE PROCEDURES
The pumps require only minimal maintenance.
To facilitate maintenance it is suggested to install the pump in an easily accessible location (see paragraph 6.2).
Periodically check piping joints to detect possible leaks.
Periodically check that there is sufficient oil in the gearbox. If necessary top up with ISO VG100 (DIN-51524-2) mineral gear
oil.
Keep the machine unit clear to readily detect possible leaks.
The machine does not require any special tool for checking or maintenance tasks. However, it is recommended the
use only of appropriate and in good conditions tooling, protective devices (gloves) and clothing (in according to current
regulations) to avoid hazards to equipment or persons.
10. DISPOSAL
The unit does not contain any harmful substances and should be disposed of following local regulations, including any
recycling information indicated on the components themselves.
Upon demolition of the machine you must destroy the identification label and any other document.