24
ATTENTION
:
only one threshold at a time can be set.
Figure 5 – Adjustable pumping element
5.5
Operation of the 989 v2
The
MACHINE
is supplied only with an electric motor and relative connection terminal strip. The
connection and management (timed, manual or based on a level reading) of the electric activation
is delegated to the customer.
No adjustments are required. The pump is electrically powered by a system that controls
activation and manages the minimum level contact and the revolution counter. There is also an
extra cycle button that provides external cycle request enabling.
For the operation of the lubrication system, refer to the machine’s management and control
instructions where the pump is installed.
To carry out the task in question, the following Personal Protection Equipment is required:
1 Reference notch
2 Yellow LED: lights when the set value is reached (outlet=ON)
3 Locking ring nut
4 Setting ring nut (manually adjustable after unlocking)
5 Green LED: indicates the correct power supply (24Vdc)
