4
4.
COMPONENTS
Micro-electric pump
: The pump is cam actuated and the piston is spring controlled. The cycle time is fixed and is
determined by the type of reducer fitted to the electric motor. The flow rate varies between 0,2
÷
1cm³ e da 1
÷
5cm³. The
operating pressure is 4 bar. It is suitable for oil with a viscosity of 32
÷
250 cSt at a fluid working temperature b5
°C and +40 °C.
Should it be required to use a different specification product, prior authorisation should be obtained from Dropsa S.p.A.
Electric Motor:
Single phase motor 50-60 Hz, 24, 110 or 220 V. the absorbed power is 2.5 W – 3.5 VA at 50 Hz and 2 W –
2.5 VA at 60 Hz. Admissible voltage variation is ±10%.
Protection grade IP 54
insulation class - F
continuous service - YES
Reservoir:
made of transparent plastic material in 1 L version and white plastic in 1.7 L version.
Minimum level indicator
Magnetic type
Reversible float with contact normally open at rest. To convert to normally open contact turn the float upside down. The
maximum power is 50 W ÷ 50 VA; the maximum voltage is 220 V ac – 150 V dc.
Suction filter:
Filtration grade 260 micron
