2
1. INTRODUCTION
This User and Maintenance Manual refer to Dropsa’s “
pneumatic pump trolley mounted”.
E’ possibile ottenere l’ultima versione richiedendola all’Ufficio Tecnico Commerciale, oppure consultando il nostro sito web
http://www.dropsa.com.
Il presente manuale di uso e manutenzione contiene informazioni importanti per la salvaguardia della salute e della sicurezza del
personale che intende utilizzare questo prodotto.
E’ necessario leggere con attenzione questo manuale e conservarlo con cura affinché sia sempre disponibile agli operatori che
intendono consultarlo.
2. GENERAL DESCRIPTION
Trolley mounted pneumatic pumps are particularly suited for the lubrication of male, ball and gate valves.
They can be easily transported to the area of use as they are installed on a trolley.
The trolleys are made in two versions to hold 5 kg and 25 kg barrels.
3. PRODUCT IDENTIFICATION
Machine identification label is located on the front side of the reservoir and contains product serial number, input voltage and
details of the operating parameters.
4. TECHNICAL CHARACTERISTICS
The pump is made up of a series of components with the following characteristics:
Note. The specifications refer to the temperature of use of +20°C (+68°F)
(1) If a different or special sealant product is used, please contact DropsA S.p.A. to ensure its suitability.
ATTENTION
:
pump maximum supply pressure 7 bar.
GENERAL CHARACTERISTICS
Empty weight
5kg version
27 Kg
25kg version
34 Kg
HYDRAULIC CHARACTERISTICS
Pumping system
Piston
Compression Ratio
100/1
Flow rate at 6 bar
400 gr*min
Max. pressure
700 bar
Pressure on sealant with follower plate set at 2 Bar
0.1 Kg/cm^2
Air inlet connection
Quick couplings 1/4"
Sealant outlet connection
Ø22 Button head coupler
Sealed drums used
5kg (Ø190) - 25kg (Ø290)
Operating temperature
- 5
÷
+ 50
°
C
Humidity
90 % Humidity rel.
Permitted lubricants (1)
Sealant/Grease max NLGI3
Operating temperatures
-20
÷
+65 °C
Noise
< 70 dB(A)
