3. To enable and disable the Hourly Chime, press DOWN key,
means Hourly Chime is on.
4. Press SET key and hold 3 seconds. Hour flashes.
5. To adjust the hour, press the UP or DOWN key.
6. Press SET again. Minutes flash.
7. To adjust the minutes, press the UP or DOWN key.
8. To exit setting mode, press SET key.
9. When the current time matches the alarm time, the alarm
sounds. Press any key to stop the alarm. The alarm sounds for 30
seconds if you do not press any key.
Showing alarm time and calendar
1. Press MODE key, to show the Alarm Time.
2. Press MODE key twice to show the Calendar.
Reactivation of the electrodes
If the Display remains dim and does not respond well to fresh
water, it is time to clean the electrodes by the following steps:
1. Empty the water tank and refill with fresh water.
2. Adding around 4 teaspoons of vinegar.
3. Shake the water tank but be carefully not to splash the liquid to
the display.
4. Do not close the water tank with lid. Allow the water-vinegar
mixture to stay in the clock overnight. Do not put it near heat or
open flame.
5. Empty the tank and refill with fresh water.
*Colour of electrodes may vary due to oxidization.
DE
LCD Uhr mit Wasserenenergie-Betrieb
Produkteigenschaften
1. Deckel
4. SET Taste
2. Display
5. UP Taste
3. MODE Taste
6. DOWN Taste
Bedienung
1. Um die Uhr zu aktivieren, den Deckel abnehmen und mit
frischem Wasser füllen.
Summary of Contents for IT3828
Page 2: ...IT3828...
